Page 21 - Olipes Industrial Maintenance

Bearings • Pulleys

Extreme temperatures and high loads
MAXIGRAS 61

High-performance EP grease for high temperatures.
NO DROPPING POINT. Designed for the lubrication of
slow-moving equipment bearings and bushings operating at
service temperatures of over +120º C and less than +160º C,
in which continous lubrication cannot be guaranteed.
NLGI 2/3 DIN KP2R-10 ISO-L-XAFEB-2 -10ºC to +180ºC (+200ºC)*

MAXIGRAS 63
High-performance EP grease for high temperatures.
NO DROPPING POINT. Contains solid additives. Designed
for the lubrication of the main and planetary gears of
dual-drum winches used in mining, and may also be used
for the lubrication of slow-moving equipment bearings
and bushings used in the mining industry, automotive
equipment, lift pulleys, cranes, agglomerate plants, etc.
NLGI 2 DIN KPF2R-10 ISO-L-XBFEB-2 -10ºC to +180ºC (+200ºC)*

Extreme temperatures and
aggressive environments

MAXIGRAS FHT-2
Flourinated EP grease with no dropping point (infusible)
based on synthetic perfluoropolyether oil (PFPE),
thickened with PTFE, designed specifically for long-
lasting lubrication in aggressive chemical environments
(acids, alkalis, solvents ...) at extreme temperatures.
DIN KFKP2U-30 ISO-L-XCGIB-2 -30ºC to +250ºC

Extreme temperatures and high rotations

MAXIGRAS COMPLEX - SP46
EP Synthetic Complex Grease.
NLGI 2 DIN KPHC2K-50 ISO-L-XECEB-2 -50ºC to +120ºC (+140ºC)
Speed Factor: 1,000,000 mm/min.
A long-life grease for regreasing operations after a long
period of time and even for lifelong greasing for moderate
loads at high rotation speeds. Excellent torque at very
low temperatures.

* Maximum continuous operating temperature recommended: +160ºC or +180ºC with continuous
lubrication. Work peaks of up to +200ºC.
Avoid direct contact with flames or any source of ignition.
19